| Credits for SteadicamRickshaw.com |
| We are open 7 days a week EMAIL: DavidGrove@gmail.com 323-385-3456 |
- To convert to vehicle mount mode:
- Remove "T" handlebar
This is the Rickshaw when it is fully assembled.
- To convert to vehicle mount mode:
Remove "U" Bar
- To convert to vehicle mount mode:
Remove "L" shaped bracket (which is attached to swivel caster)
from
the "T" shape square hitch.
Take the other "L" shaped vehicle Adaptor
bracket from the case and remove the "T"
shaped adaptor from the Rickshaw.
bracket from the case and remove the "T"
shaped adaptor from the Rickshaw.
| <-------------------- |
| <-------------------- |
Take the other "L" shaped vehicle Adaptor bracket and
insert it into the "T" bracket.
Hand tighten the two knobs but do not over tighten.
Insert the bracket system into a 2" square hitch.
Use the Large hitch pin to secure the bracket.
Insert the bracket as far as it will go into the vehicle's
hitch.
Note: The "T" section fits into the vehicle's hitch.
Now you can slide the Rickshaw onto the "L" shaped
vehicle adaptor. (not pictured)
Not pictured: Once the Rickshaw is on the "L" shaped
adaptor, insert the safety pin provided through the holes
(the long part of the "L"shape bracket. (this is so the
rickshaw doesn't slide off)
Then hand tighten (do not over tighten) the knobs that
are under the seat. Wiggle the seat as you tighten to
make sure it's snug and the seat doesn't move.
I hope to have more pictures up soon.
SAFETY: WEAR A HELMET, KNEE PADS AND MAKE
SURE YOU HAVE A PROFESSIONAL DRIVER WHEN
USING THE RICKSHAW IN VEHICLE MOUNT MODE.
Use rickshaw on smooth flat surfaces in rickshaw and
vehicle mount mode.
insert it into the "T" bracket.
Hand tighten the two knobs but do not over tighten.
Insert the bracket system into a 2" square hitch.
Use the Large hitch pin to secure the bracket.
Insert the bracket as far as it will go into the vehicle's
hitch.
Note: The "T" section fits into the vehicle's hitch.
Now you can slide the Rickshaw onto the "L" shaped
vehicle adaptor. (not pictured)
Not pictured: Once the Rickshaw is on the "L" shaped
adaptor, insert the safety pin provided through the holes
(the long part of the "L"shape bracket. (this is so the
rickshaw doesn't slide off)
Then hand tighten (do not over tighten) the knobs that
are under the seat. Wiggle the seat as you tighten to
make sure it's snug and the seat doesn't move.
I hope to have more pictures up soon.
SAFETY: WEAR A HELMET, KNEE PADS AND MAKE
SURE YOU HAVE A PROFESSIONAL DRIVER WHEN
USING THE RICKSHAW IN VEHICLE MOUNT MODE.
Use rickshaw on smooth flat surfaces in rickshaw and
vehicle mount mode.
Take the other "L" shaped vehicle Adaptor
bracket from the case and remove the "T"
shaped adaptor from the Rickshaw.
bracket from the case and remove the "T"
shaped adaptor from the Rickshaw.
| <<<<<<<<<<<<< |
| <<<<<<<<<<<<< |