This is the Rickshaw when it is fully
assembled in Rickshaw Mode.
assembled in Rickshaw Mode.
To convert to Vehicle mount mode remove Long U-shaped handle bar.
Remove the "L" shaped tubing from the Black Case.
Take the "T" shaped tubing and insert into Hitch on the vehicle and secure the
hitch with the included hitch pin.
Take the "L" shaped tubing and insert into "T" section. Insert pin then tighten
knobs.
Take the "T" shaped tubing and insert into Hitch on the vehicle and secure the
hitch with the included hitch pin.
Take the "L" shaped tubing and insert into "T" section. Insert pin then tighten
knobs.
| <-------------------- |
| <-------------------- |
Now slide the Rickshaw onto the "L"bracket.
Then hand tighten (do not over tighten) the knobs that are under the seat. Wiggle the seat as you tighten to make sure it's snug and the seat doesn't move.
Inspect all pins make sure knobs are snug.
SAFETY: WEAR A HELMET, KNEE PADS AND MAKE SURE YOU HAVE A PROFESSIONAL DRIVER
WHEN USING THE RICKSHAW IN VEHICLE MOUNT MODE.
Use rickshaw on smooth flat surfaces in rickshaw and vehicle mount mode and do not exceed 15 miles
per hour.
The rickshaw vehicle mount is not designed to go faster than this.
Then hand tighten (do not over tighten) the knobs that are under the seat. Wiggle the seat as you tighten to make sure it's snug and the seat doesn't move.
Inspect all pins make sure knobs are snug.
SAFETY: WEAR A HELMET, KNEE PADS AND MAKE SURE YOU HAVE A PROFESSIONAL DRIVER
WHEN USING THE RICKSHAW IN VEHICLE MOUNT MODE.
Use rickshaw on smooth flat surfaces in rickshaw and vehicle mount mode and do not exceed 15 miles
per hour.
The rickshaw vehicle mount is not designed to go faster than this.
 |  |  |  |  |  |  |  |
Case includes tire pump and "L" shape vehicle mount piece.
Slide off "L" shaped caster tubing (make sure someone else is holding
the rickshaw as it will lunge foward as the weight is taken off!)
the rickshaw as it will lunge foward as the weight is taken off!)
Remove the "T" shaped square tubing from
the rickshaw base.
the rickshaw base.
| "T" bracket goes into vehicle's hitch. Insert trailer hitch pin. |
| "L" bracket attaches to "T" shape bracket. Rickshaw slides on to the Long section of the "L" bracket. insert pin. |
| www.SteadicamRickshaw.com RENTALS |
| Vehicle Mount Instructions |
323-385-3456